12-Shearing Machine > Heavy Duty Hydraulic Shear

Heavy Duty Hydraulic Shear
H-0435~H-1365

Standard Features:

1.High grade carbon/chrome 2-Edge Upper blade and 4-Edge Bottom Bade

(One piece each)

2.Hydraulic rake angle adjustment

3. Front supporting arm w / front setter.

4. Side and back gauges w / dual scales.

5. Single position, NC type power back gaude (H-0865 / H-1065 / H-1365 only).

6. Foot switch w / control button.

7. Full-length finger guard.

8. Blade clearance (Gap) adjustment device.

(Standard equipment from H-0445 to heavier models).

9. Overload protection for motors and pumps.

Optional accessories :

1. NC. Power back gauge, single position NC type w /

read-out display and micro adjustment.

2. Angle gauge.

3. Hydraulic type thin Sheet Supporter.

4. Power back gauge w / lifting function.

5. Front support arm extension, 1.5/2.0/3.0 meters.

6. Side gauge extension, 1.5/2.0/3.0 meters.

NC POWER BACK GAUGE

(FOR H-0864/H-1065/

H-1365 ONLY)

MANUAL BACK GAUGE

SAFETY SENSOR/

LIGHT CURTAIN

(OPTIONAL)

HYDRAULIC TYPE THIN

SHEET SUPPORTER (OPTIONAL)

SIDE GAUGE

BLADE CLEARANCE (GAP)

ADJUSTMENT DEVICE

(STANDARD FOR H-0445 & HEAVIER MODELS)

CENTRALIZENDCONTROL PANEL

ELGO P8511

MINIKOL M15S

CONTROL UNITS

(OPTIONAL)

SPECIFICATIONS:
MODEL		H-0435	H-0535	H-0635	H-0835	H-1035	H-1335
CAPACITY	MILD STEEL (mm)	3.5 x 1329	3.5 x 1580	3.5 x 2080	3.5 x 2540	3.5 x 3100	3.5 x 4080
CAPACITY	STAINLESS (mm)	2.2 x 1320	2.2 x 1580	2.2 x 2080	2.2 x 2540	2.2 x 4080	2.2 x 4080
STROKES PER / MIN (S.P.M.)		35-47	32-44	28-40	26-36	24-34	16-24
HOLD-DOWNS	NUMBERS	8	9	11	13	16	18
HOLD-DOWNS	PRESSURE (tons)	2.5	3.5	4.2	6.7	8.2	9.2
GAUGE RANGE	FRONT (mm)	1000	1000	1000	1000	1000	1000
GAUGE RANGE	BACK (mm)	600	600	600	600	600	600
TOP BLADE		HYDRAULIC ADJUSTMENT RAKE ANGLE
TOP BLADE RAKE ANGLE		1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°
MOTOR (HP)		7.5	7.5	7.5	10	10	15
OIL TANK CAPACITY (gallons)		25	30	35	40	40	40
SHIPPING WEIGHT (kgs)		2000	2380	2700	3480	3850	5400
SIZE (APPROX.)		2250 x 1150 x 1650	2450 x 1150 x 1650	3000 x 1200 x 1650	3500 x 1250 x 1650	4100 x 1250 x 1650	5120 x 1500 x 1800

MODEL		H-0445	H-0545	H-0645	H-0845	H-1045	H-1345
CAPACITY	MILD STEEL (mm)	4.5 x 1320	4.5 x 1580	4.5 x 2080	4.5 x 2540	4.5 x 3100	4.5 x 4080
CAPACITY	STAINLESS (mm)	3.5 x 1320	3.5 x 1580	3.5 x 2080	3.5 x 2540	3.5 x 3100	3.5 x 4080
STROKES PER / MIN (S.P.M.)		30-42	28-40	24-36	22-32	20-30	16-24
HOLD-DOWNS	NUMBERS	8	9	11	13	16	18
HOLD-DOWNS	PRESSURE (tons)	9.2	4.5	5.6	7.8	9.6	10.1
GAUGE RANGE	FRONT (mm)	1000	1000	1000	1000	1000	1000
GAUGE RANGE	BACK (mm)	600	600	600	600	600	600
TOP BLADE		HYDRAULIC ADJUSTMENT RAKE ANGLE + BLADE CLEARANCE MANUAL ADJUSTOR
TOP BLADE RAKE ANGLE		1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°
MOTOR (HP)		10	10	15	15	15	20
OIL TANK CAPACITY (gallons)		25	30	35	40	40	40
SHIPPING WEIGHT (kgs)		2250	2450	3050	4100	4700	6640
SIZE (APPROX.)		2250 x 1300 x 1650	2500 x 1300 x 1650	3100 x 1300 x 1650	3550 x 1400 x 1650	4200 x 1400 x 1650	5100 x 1700 x 1880

MODEL		H-0865	H-1065	H-1365	H-0465	H-0565	H-0665
CAPACITY	MILD STEEL (mm)	6.5 x 2540	6.5 x 3100	6.5 x 4080	6.5 x 1320	6.5 x 1580	6.5 x 1580
CAPACITY	STAINLESS (mm)	4.5 x 2540	4.5 x 3100	4.5 x 4080	4.5 x 1320	4.5 x 1580	4.5 x 1580
STROKES PER / MIN (S.P.M.)		22-30	20-30	16-24	30-42	28-40	24-36
HOLD-DOWNS	NUMBERS	13	16	18	8	9	9
HOLD-DOWNS	PRESSURE (tons)	13	16	18	3.6	4.5	4.8
GAUGE RANGE	FRONT (mm)	1000	1000	1000	1000	1000	1000
GAUGE RANGE	BACK (mm)	POWER BACK GAUGE 800mm			600	600	600
TOP BLADE		HYDRAULIC ADJUSTMENT RAKE ANGLE + BLADE CLEARANCE MANUAL ADJUSTOR
TOP BLADE RAKE ANGLE		1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°	1/2 - 2°
MOTOR (HP)		20	20	20	15	15	15
OIL TANK CAPACITY (gallons)		60	80	100	25	30	35
SHIPPING WEIGHT (kgs)		5300	6100	7750	2600	3200	3600
SIZE (APPROX.)		3550 x 1850 x 1900	4150 x 1800 x 1900	5100 x 1900 x 1900	2250 x 1400 x 1650	2550 x 1450 x 1650	3150 x 1850 x 1650
ALL SPECIFICATIONS & DESIGN ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

*Above information are for reference only. The machine design, specification as and construction are subject to change without prior notice.