1. Selective bed width:

    S series: 300mm

    M series: 350mm

    L series: 400mm

2. Varied spindle bore diameters:

     S series: Ø58mm / Ø78mm(Optional)

     M series: Ø85mm

     L series: Ø85mm / Ø115mm(Optional)

3. With imported bearings installed on spindle, maximum cutting depth can be 8mm and
     roundness reaching 0.003mm (200mm long).

4. Equipped with plastic rear gears, shafts and gears inside headstock are well protected if crash
    should occur. (S series)

5. Thermal treated and precision ground alloy gears.

6. Universal gearbox for both imperial and metric threading – converting table also attached.

7. Tracks of cross slide and bed are well lubricated with lubrication pump (manual).

8. Overload device to ensure safely when operating.

9. Wear-resistant phosphor bronze lead screw nuts.

10. Double reservoir oil bath type cross slide. (for S series)

11. Thermal treated Meehanite cast bed, hardness of bed reaching HS70.

12. One-piece base with high rigidity and low vibration.

13. High-capacity coolant tank offers sufficient coolant output.

Model

TL-430

Swing Over Bed

430 mm (17")

Swing Over Cross Slide

240 mm (9-1/2")

Center Height

215 mm (8-1/2")

Center Distance (mm)

560,760,1000,1500,2000  (22",30",40",60",80")

Swing Over Gap

650 mm (25-1/2")

Bed Width

300 mm (11-4/5")

Spindle Nose

 ASA D1 - 6 / D1 - 8 (Opt.)

Spindle Bore

58 mm (2-1/4") / 78 mm (3") (Opt.)

Taper of Spindle Bore

MT 6 / MT 7(Opt.)

Spindle Speed

20 ~ 2000 R.P.M. ( 12 steps )-spindle bore :58mm /
40 ~ 2000 R.P.M. ( 12 steps )-spindle bore :78mm

Inch Threads Range

4 ~ 56 T.P.I.

Metric Threads Range

P 0.5 ~ P 7

Longitudinal Feeds Range

0.05 ~ 0.82 mm (0.002-0.032")

Cross Feeds Range

0.02 ~ 0.4 mm (0.001-0.0094")

Leadscrew Diameter

35 mm (1-1/3")

Leadscrew Pitch

4 T.P.I. or 6 mm

Taper of Tail Center

MT 4

Tail Spindle Travel

150 mm (5-7/8")

Tail Spindle Diameter

58 mm (2-1/4")

Main Drive Motor

5HP (3.75KW) / 7.5HP (5.625KW.Opt.)

Coolant Pump

1/8 HP (0.1KW)

Compound Rest Travel

125 mm (4-7/8")

Cross Slide Travel

245 mm (9-2/3")

Machine Dimensions (cm)

L: 165,189,215,265,317     W:81     H:119

Packing Dimension (cm)

L: 175,198,228,279,337     W:95     H:162

Net Weight  (kg)

1500,1680,1760,2050,2320

Gross Weight (kg)

1600,1780,1860,2200,2470

Standard Accessories

Optional Accessories

■ Tool Box

1set

■ 3-jaw scroll chuck

■ Chuck guard

■ Centers

2pcs

■ 4-jaw independent chuck

■ American tool post

■ Safety pin

1set

■ Face plate

■ Change gears for D.P and module thread

■ Screw wrench for cutter setting

1pc

■ Steady rest

■ 5C lever collect closer

■ Back plate

1pc

■ Follow rest

■ Driving plate

■ Coolant system

1set

■ Work light

■ Quick change tool post

■ 4-way tool post

1set

■ 4-position carriage stop

■ Digital readouts

■ Auto-feed stopper ring

1set

■ Micro carriage stop

■ Hydraulic copying machine

■ Center sleeve

1pc

■ Live centers

■ Chip guard

■ Levelling  pads

1set

■ Rear cutter rest

■ ID/OD Grinder

■ Taper turning attachment

■ Rapid Traverse (L series)

■ Rear splash guard