This attachment comprises a base, swiveling
horizontally with respect to table, and a work head swiveling at 15 degree
angle. This construction simplifies greatly the setting of elevation and
depression angle. Further more, rugged design gives the M-40 the capacity for
grinding large size cutters and tools.
Capacity: Max. dia. of
cutter........18" (457mm)
NO:
02 RADIUS GRINDING ATTACHMENT
This is ideal for sharpening the radii of
ball end mills and styli. It consists of two slide bases, each with
micrometer adjustment and a work head having a M.T. No. 5 or No. 12 taper hole
spindle. Indexing of straight flutes cutters is possible by using an index
plate mounted on the back of work head.
This is suitable for comer radius
grinding of face mill and shell end mills. The position for grinding start is
set by the micrometer to eliminate grinding error. The grinding capacity of
this attachment is 0 through 1" radii (0 through 25mm) and 0 to 12"
cutter diameter (0 through 300mm).
Capacity:
Radius.......................................0-1" (0-25mm)
Max. Dia. Of cutter......................11 3/4" (300mm)
An accurate radius on the. Corner of teeth can be ground.
NO:
04 CYLINDRICAL GRINDING ATTACHMENT
This attachment is most suitable for
straight or taper cylindrical grinding and for face grinding of various
tools.
Capacity:
Swing...........................................................10"
(250mm)
Main spindle speed..................................310rpm. (50c/s) 370rpm. (60c/s)
Motor.........................................................1/4HP. (0.2kw)
NO:
05 HELICAL GRINDING ATTACHMENT
This attachment is suitable for grinding
the relief and rake angle of spiral cutters or the straight teeth of hobs,
end mills and center drills. The work spindle is possible to be turned twice
at Max. for the lead of 0 through infinity.
Taper hole of work spindle is M.T.No.4.
Lead: 0-8 (stepless) Spindle turns twice at max.
Index: 24 (Standard)
Grinding length: max. 12 1/2" Grinding length: max. 12 1/2" (320mm)
Module (Hob): max.8
Helix (Hob): max.±8°
NO:
06 INTERNAL GRINDING ATTACHMENT
This is generally used with the Cylindrical
Grinding Attachment. Of course, it can be used for grinding internal tapers.
Capacity:
Internal spindle..................................20,000rpm
Length of hole up to 1-9/16" or 3" (40mm or 75mm)
Range of bore to be ground:5/16"-3/4" (8-20mm) or 1/2"-2"
(12-50mm)
NO:
07 WORKHEAD INDEXING ATTACHMENT
Accurate indexing can be made quickly and
easily by mounting the Indexing Attachment on the standard work head. This
eliminates the need for a tooth rest which is normally required for grinding
cutters. If not specified, work head indexing attachment is provided with a
plate of twenty four equally spaced slots, includes
one 24 notched index plate Extra index plates ... specify number of notches
desired.
NO:
08 EXTENDED GRINDING WHEEL SPINDLE
This attachment offers extreme
convenience when the extended spindle application is required. As this
spindle is also cartridge type construction, it is readily interchangeable
with standard spindle. Spindle extension is 3"(75mm) Extension Convenient
when the extended spindle application is required. Spindle is also cartridge
type and interchangeable with standard spindle.
NO:
09 SURFACE GRINDING ATTACHMENT
This is a so called "Universal
Vise" and ideally suited to grinding bits as well as surface grinding.
It consists of swivel vise and base. The intermediate support permits the
vise to swivel 360 degrees horizontally and vertically, so the work-piece can
be set easily.
Capacity: Width of vise................................4" (100mm) Depth of vise...............................1" (25mm) Opening.................................2 3/4" (70mm)
NO:
10 DRILL POINTING ATTACHMENT
This attachment have been designed to provide a simple,
effective means of sharpening drills accurately with the minimum of skill.
The drill itself is held in a precision six jaw self-centering chuck,
suitably geared to the operating handle.
NO:
11 LATHE & PLANET TOOL GRINDING ATTACHMENT
This attachment facilitates setting
cutters for grinding rake and relief angles. The large work support provides
and outstanding grinding capability. This attachment is ideally suited to
grinding cutters for lathes and planers.
Capacity:
3/8"-1 1/2" (10-38mm)
Convenient for grinding rake face and relief angles.
NO:
12 SPRING COLLET CHUCK
This chuck can be mounted directly in the
taper hole of the work head a ASA No. 50. This is an
indispensable attachment for small cutter grinding. Spring Collet Chuck for larger size cutters or adapter for 5C
collets is is also available. Size of collets: 6, 8, 10, 12, 16, 20, 25mm or
1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1 inches
NO:
13 WET GRINDING ATTACHMENT
This is so called "Coolant Supply
System". It is conveniently used for cylindrical, intemal,
surface and various cutters grinding works when necessary. Coolant pump motor
... 1/8HP(0.1Kw)
NO:
14 DUST COLLECTOR
This accessory contributes toward
operator safety and his health by collecting dust particles flying off the
grinding wheel during grinding. It is compact and consumes a minimum of floor
space.
Specifications
Capacity
M-40
Swing
over table
250mm
10"
Distance
between centers
700mm
27 1/2 "
Distance
between tailstock & workhead
580mm
22 3/4 "
Taper
hole in worehead spindle one end
MT#5
the other end
ASA#50 (or B&s#12)
Table
T-Slot
(numer & size)one
+0.05 mm (0.565")
-0.00 mm
Working
surface
135 x 940 mm
5 5/16"x37"
Gringding wheel spindle rpm
2600, 3700, 6200
Grinding
wheel spindle motor
1.5hp (1.2kw)
Range
of movement
Longitudinal
movement of table
400 mm
16"
Cross
movement of saddle
250 mm
10"
Graduation
for table swivel movement
+60°
Table
graduation on end, for taper of
-10°
Vertical
movement of wheel head
250 mm
10"
Wheel
head tilts
+15°
Wheel
head swivels
360°
From
wheel spindle center to top table
max.
300 mm (12")
min. 50 mm (2")
From
wheel spindle center to T-slot table
max.
415 mm (16 1/2")
min. 165 mm (6 1/2")
Required
floor space
1550 x 1735 mm
61"x68 1/2"
Net
weight of machine
1160 kg
2560 lbs
Dimension
of Packing case
1460 x 1460 x 1510 mm
*Above information
are for reference only. The machine design, specificationas
and construction are subject to change without prior notice.
